Super filters stop sand

M17A3

* Air filter, NSN 2940-01-529-8953* Inlet cap, NSN 4730-00-485-5055Then rinse the filter from the inside out with low-pressure water. Shake off excess water and let the filter air dry. Never use compressed air, an open flame or a dryer. They damage the filter.To clean both filters, tap the filter element with your hand to knock dirt loose. Gently brush out the dirt with the soft bristle brush in your tool kit. Never use gas, caustic solvents, strong detergents, high-pressure water, or steam on the element. They damage the filter.A/E32U-8* Outlet cap, NSN 4730-00-929-0791When the filter is dry, re-oil it with K&N air filter oil, which is also part of the cleaning kit. Put one pass of oil along the bottom and top of each of the filter's pleats. Let the oil soak into the filter for 20 minutes. Apply more oil to any filter areas that are still white. Never use any other oils on the filter except in emergencies.* Inlet cap, NSN 4730-00-484-5055

When the filter is dry, re-oil it with K&N air filter oil, which is also part of the cleaning kit. Put one pass of oil along the bottom and top of each of the filter's pleats. Let the oil soak into the filter for 20 minutes. Apply more oil to any filter areas that are still white. Never use any other oils on the filter except in emergencies.